Products HPv5

 

 

 

 

 

 

FMS Examples and Specs

1 Example Single Unit FMS (Master Unit)

Channel 1 records actual force produced

Channel 2 records sled position as it passes center

 

 

 

 

2 Example Dual Unit FMS (Master Unit coupled with Slave Unit)

Channel 1 records sled position of  HPL as it passes center
Channel 2 records actual force of live rope on HPL

Channel 3 records actual force of live rope on HPR

Channel 4 records sled position of  HPR as it passes center

 

 

 

 

3 Example Single Unit FMS (Master Unit) With Custom Configuration

Channel 1 records actual force produced

Channel 2 records the degrees of motion of the limb
Channel 3 records electrical activity of the triceps muscle group
Channel 4 records electrical activity of the biceps muscle group

 

 

Specs

 

The Master FMS Consists of:

 

1 – Rope Force Link with 9 foot cable and 9 pin female connector

 

1-  Rope Guide and Attachment Hardware

 

1 – Sled Counter/Position LED sensor with 9 foot cable and 3 pin female connector

 

1 – FMS Master Force to Data Converter 110 volt AC input with 6 foot cable USB data output

3 pin male sensor input port

9 pin male input Force Link Port

6 pin female DIN Slave FMS port

3 prong female 110~120 AC volt cable port

3 prong 110~120 AC volt power cable

On/Off Switch with on light indicator

 

1 - Data Collection and Analysis Software

1 - Calibration and operations manual in print and CD format

 

 Computer is not supplied.  Must be PC platform based computer.  Will not accommodate MAC platform

 

 

The Slave FMS Consists of:

 

1 – Rope Force Link with 9 foot cable and 9 pin female connector

 

1-  Rope Guide and Attachment Hardware

 

1 – Sled Counter/Position LED sensor with 9 foot cable and 3 pin female connector

 

1 – FMS Slave Force to Data Converter 110 volt AC input with 6 foot cable USB data output

3 pin male sensor input port

9 pin male input Force Link Port

6 pin male to male DIN 6 foot cable for FMS port

6 pin female DIN Slave FMS port

3 prong female 110~120 AC volt cable port

3 prong 110~120 AC volt power cable

On/Off Switch with on light indicator

Computer is not supplied.  Must be PC platform based computer.  Will not accommodate MAC platform

 

The Seller (Engineering, Marketing Associates) DBA Impulse Training Systems agrees to replace any defective parts free of charge for a period of 90 days from the date of receipt by the Purchaser of product(s) produced by the Seller.  In the event of a defect needing replacement or repair, Purchaser is to notify the seller promptly of any issues with the product(s).

 

Obvious excessive abuse leading to failure of parts will void this warranty.  Failure to properly install the product will void this warranty.

 

This exercise-training device is designed for indoor operation and should not be used in any outdoor environment.  Obvious outdoor use will void this warranty.  Installation near swimming pools and whirlpools where exposure to caustic chemicals are present will void this warranty. 

 

For assistance, direct communications to:

Tel       1 800 964 2362

Fax      1 770 251 0808

E-Mail  impulse@impulsepower.com

 

Return goods shipping address: Engineering, Marketing Associates

339 Farmer Industrial Blvd, Suite D Newnan GA 30263

 

This warranty supersedes all previous warranties as of 9/1/2009.

Warranty is not binding outside the Continental United State and subject to review for consideration at the sellers discretion